| CEA-2006 Compliant |
 |
| Number of Channels |
1 |
Rated Power
continuous power |
1500 Watts RMS x 1 @ 4-Ohms
2500 Watts RMS x 1 @ 2-Ohms
2500 Watts RMS x 1 @ 1-Ohm
Two amplifiers in bdSYNC configuration: 5000 Watts RMS x 1 @ 2-Ohms
|
Total Power
total sum of 'rated power' |
2500 Watts |
| Bridgeable |
Yes (two amps "strapped" using bd-Sync2 creates one monster amplifier) |
| Efficiency (average) |
81.9% @ 4-Ohm
77.7% @ 2-Ohm
64.5% @ 1-Ohm |
| Crossover Controls |
Low-Pass (LP): 35Hz-250Hz @ 24dB/octave Butterworth
Infrasonic: 12dB/octave Butterworth, -3dB @ 28Hz
|
| Tone Controls |
Bass: 0dB to +18dB @ 45Hz
|
| Signal Input |
1 RCA pair |
| Signal Output |
1 RCA pair |
| Power Input Connector |
Block |
| Power Wire Gauge |
1/0 AWG |
| Speaker Output
Connector |
Block |
| Speaker Wire Gauge |
8 AWG to 16 AWG |
| Heat Sink Type |
Cast aluminum |
| Cooling |
Convection |
| Remote Controls |
Optional Remote PEQ
(overrides built-in Punch Bass) |
| Visual Indicators |
Power (Blue LED)
Thermal (Red LED)
Protect (Yellow LED)
Output -00dB to +2dB @ 11 steps (Blue LEDs)
Battery 9VDC to 16VDC @ 11 steps (Blue LEDs) |
| Circuit Topology Class |
Class bd |
| Frequency Response |
20Hz to 250kHz +/- 0.5dB |
| Shipping Weight |
TBA Lbs.
(TBA Kg) |
| Dimensions (HxWxL) |
2.14 x 8.14 x 21.875 (in)
5.44 x 20.68 x 55.66 (cm) |
| Dimensional Diagram |
 |
The T2500-1bdCP is based on the legendary T2500-1bd amplifier design with a proprietary "Constant Power" configuration that delivers up to 25% more power (Watts) across all impedance loads. The result is a listening experience cleaner, louder and more impressive than ever before. This T2500-1bdCP amplifier pumps out 2,500 watts, easily driving any array of woofers wired to a 1-ohm load. Use two amps in Power-Sync mode for a whopping 5,000 watt power horse!
