| CEA-2006 Compliant |
 |
| Number of Channels |
4 |
Rated Power
continuous power |
100W x 2 @ 4-Ohms RMS
150W x 2 @ 2-Ohms RMS
300W x 1 @ 4-Ohms bridged RMS
2-Ohms x 2 bridged Stable |
Total Power
total sum of 'rated power' |
600 Watts |
Dynamic Power
powercube measurement
|
Front Channels
139 Watts x 2 @ 4-Ohms 0° Res
236 Watts x 2 @ 2-Ohms 0° Res
Rear Channels
140 Watts x 2 @ 4-Ohms 0° Res
236 Watts x 2 @ 2-Ohms 0° Res |
| Bridgeable |
Yes |
| Efficiency (average) |
70% @ 4-Ohms 0° Res
64% @ 2-Ohms 0° Res
|
| Crossover Controls |
Front High-Pass (HP): 50-500Hz 24dB/octave Butterworth
Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth
Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth |
| Tone Controls |
Front Channels - Punch EQ
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz
Rear Channels - Punch EQ
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz |
| Signal Input |
Front Low level: 1 RCA pair
Rear Low level: 1 RCA pair
|
| Signal Output |
Low Level: 1 RCA pair |
| Power Input Connector |
Block |
| Power Wire Gauge |
4 AWG |
| Speaker Output
Connector |
Screw terminal barrier strip |
| Speaker Wire Gauge |
8 AWG to 18 AWG |
| Heat Sink Type |
Cast aluminum |
| Cooling |
Convection |
| Remote Controls |
Optional Remote Punch EQ
(overrides built-in Punch EQ) |
| Visual Indicators |
Power
Thermal
Protect |
| Circuit Topology Class |
Class A/B |
| Frequency Response |
20Hz to 20kHz +/- 1dB |
| Shipping Weight |
12.00 Lbs.
(5.44 Kg.) |
| Dimensions (HxWxL) |
2.14 x 8.14 x 14.91 (in)
5.42 x 20.68 x 37.86 (cm) |
| Dimensional Diagram |
 |
The T600-4 amplifier offers the perfect balance of power output and compact design required for high performance audio systems. The 4-channel configuration allows fine tuning adjustments between front stage component systems and rear surround speakers. The built-in crossover also allows the rear channels to be configured for running one or two subwoofers.
