| CEA-2006 Compliant |
 |
| Number of Channels |
4 |
Rated Power
continuous power |
50W x 4 @ 4-Ohms RMS
100W x 4 @ 2-Ohms RMS
200W x 2 @ 4-Ohms bridged RMS |
Total Power
total sum of 'rated power' |
400 Watts |
Dynamic Power
powercube measurement
|
Front Channels
86 Watts x 2 @ 4-Ohms 0° Res
144 Watts x 2 @ 2-Ohms 0° Res
Rear Channels
85 Watts x 2 @ 4-Ohms 0° Res
142 Watts x 2 @ 2-Ohms 0° Res |
| Bridgeable |
Yes |
| Efficiency (average) |
71% @ 4-Ohm
70% @ 2-Ohm |
| Crossover Controls |
Front High-Pass (HP): 50Hz-500Hz 12dB/octave Butterworth
Front Low-Pass (LP): 50-500Hz 12dB/octave Butterworth
Rear High-Pass (HP): 50Hz-500Hz 12dB/octave Butterworth
Rear Low-Pass (LP): 50-500Hz 12dB/octave Butterworth |
| Tone Controls |
Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Front Punch EQ2 Treble: 0dB to +12dB @ 12kHz
Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Rear Punch EQ2 Treble: 0dB to +12dB @ 12kHz
Function depends upon LP/AP/HP switch position |
| Signal Input |
Low level: 2 RCA pair
|
| Signal Output |
n/a |
| Power Input Connector |
Block |
| Power Wire Gauge |
4 AWG |
| Speaker Output
Connector |
Screw terminal barrier strip |
| Speaker Wire Gauge |
8 AWG to 18 AWG |
| Heat Sink Type |
Cast aluminum |
| Cooling |
Convection |
| Remote Controls |
Optional PEQ Remote Punch EQ
(overrides built-in Punch EQ2 for rear channels only) |
| Visual Indicators |
Power
Thermal
Protect |
| Circuit Topology Class |
Class A/B |
| Frequency Response |
20Hz to 20kHz +/- 1.0dB |
| Shipping Weight |
8.89 Lbs.
(4.03 Kg.) |
| Dimensions (HxWxL) |
2.25 x 7.625 x 13.02 (in)
5.71 x 19.37 x 33.07 (cm) |
| Dimensional Diagram |
 |
The P400-4 is perfect for 4-way front-stage/rear-fill or 3-way front-stage/subwoofer systems. Simply drop a pair of component speakers on the front channels and subs on the rear and BOOM - you got "The PUNCH." With its flexible design, the P400-4 is an excellent amplifier choice for virtually any vehicle.
